The definitive mixture to make kerosene spilled effects in any type of modern or classic aircrafts. This is not product to make oil and grease effects. This product is good mainly to make kerosene spilled effects only with a great realism. This product is enamel and it can be blended with the rest of our colors and it is diluted with our White Spirit.

Read more less

WW2 IJAAF Aircraft Colours is a set of eight acrylic paints essential for painting the authentic colours used by the Imperial Japanese Army Air Force during World War Two. The new colours have been carefully researched for accuracy by the author of the famous “Aviation of Japan” blog. Included are six basic colours for painting the exterior surfaces and two standard interior colours. A profile guide is printed on the backside of the box. The paints are not only historically accurate and specially formulated with top quality components; they also have been designed taking into account the scale reduction effect*.  The acrylic paints are ready to use straight from the bottle; simply shake and the paint is ready to go. Dilution is not necessary when airbrushing AK acrylic paints; however, when painting camouflage or fine lines, add a few drops of the AK specially formulated thinner AK712. Useful for all acrylic paints, the AK712 improves the performance of the paint and is vastly superior to most other available thinners, resulting in a greater degree of coverage when applied by brush.  This set contains: AK02261 - #1 Hairyokushoku (Grey-Green) AK02262 - #3 Hairanshoku (Blue-Grey) AK02263 - #7 Ohryoku Nana Go Shoku (Olive Brown) AK02264 - #21 Midori Iro (Green) AK02265 - #27 Ao Midori Iro (Blue Green) AK02266 - #29 Ki Midori Iro (Yellow Green) AK02267 - #30 Karekusa Iro (Dry Grass Colour) AK02268 - #31 Cha Kasshoku (Tea Colour)

Read more less

This enamel wash is specially designed to bring out the details in gray warships typical of many nationalities from the Kriegsmarine, United States Navy, or Imperial Japanese Navy. Also it can be used in other subjects such as aircraft or gray tanks. The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows.The excess of the wash can be easily removed with a clean brush and White Spirit.

Read more less

The definitive collection of pigments designed exclusively for modelers.A series of basic necessary and frequently used colors mixable between.AK Interactive pigments are much finer than any of the existing products on the market and contain nearly 3 times the quantity of other leading brands at a lower price.These pigments can be applied either dry of wet depending on your taste and the goal you try to achieve.Mix them with Pigment Fixer or White Spirit to apply them wet. When you decide to apply the pigments dry you can later fix them in place with either Pigment Fixer or White spirit.

Read more less

Obtain a greyish, dark and matt aspect that you find on many engines that have had a lot of use. Apply with a brush or an airbrush to obtain different results. Blend with a clean brush moist with Enamel Thinner.

Read more less

The definitive collection of pigments designed exclusively for modelers.A series of basic necessary and frequently used colors mixable between.AK Interactive pigments are much finer than any of the existing products on the market and contain nearly 3 times the quantity of other leading brands at a lower price.These pigments can be applied either dry of wet depending on your taste and the goal you try to achieve.Mix them with Pigment Fixer or White Spirit to apply them wet. When you decide to apply the pigments dry you can later fix them in place with either Pigment Fixer or White spirit.

Read more less

This enamel wash is specially designed to bring out the detail of the wooden covers typical of many warships. It can also be easily used for any other wooden subject.Just shake well before use and you can apply it directly to your model to create contrast and depth in the details. Remove excess with a clean brush moist in Enamel Thinner. This is an enamel product and can by dissolved using our White Spirit or Odourless Turpentine.The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today.

Read more less

Filters are designed to achieve a subtle tonal variation for vehicles especially in monotone camouflage colours. Shake and apply directly from the bottle with a flat brush. This filter is suitable for Nato vehicles and any green vehicle in general or as a component of your camouflage. At the same time, the filter adds depth and richness to our vehicle, preparing it for the next painting steps.Use the filters by wetting a brush and applying it without flooding the surface, to enrich the tones on your models, unify the camouflage or highlight areas with a different tone. With these products we will avoid mixing paints, looking for the correct dilution or looking for the correct colours for our vehicle.These enamel-based filters can be cleaned or diluted with White Spirit.

Read more less

This colour is perfect for southern Europe areas, although it can be used for other places around the world. When its dry this product has a satin effect which helps represent the aspect of wet or damp earth. It can be applied using washes over your model or mixed with plaster to give volume to mud effects. Shake well before use and use in parts desired of your model. Afterwards, blend using a wide flat brush dampened with AK Interactive White Spirit.

Read more less

With this enamel product the modeler may easily represent streaking dirt effects on ship hulls painted in red primer. It can also be used on other issues such as the hull of a tank. Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moistened in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.  

Read more less

A 100ml bottle of burnishing fluid for brass photoetch. Darkens the photoetch down to the colour of dark steel, ideal for machine gun barrels etc, and also very useful to prevent shiny patches coming through if your model’s paintwork is likely to be handled or become chipped.

Read more less

Filters are designed to achieve a subtle tonal variation for especially vehicles in monotone camouflage colors. Shake and apply directly from the bottle with a moist flat brush. This filter allows us to change subtly the base tone of our vehicles in grey or panzer grey making it more accurate and authentic color. At the same time, the filter adds depth and richness to our vehicle, preparing it for the next paint steps.Use the filters by moistening a brush and applying it without flooding the surface, to enrich hues in your models, unify camouflage, or highlight areas with a different tone. With these products we will avoid mixing paints, looking for the correct dilution, or searching for the correct colors for our vehicle.These filters are enamel based and can be cleaned or diluted with Odorless Enamel Thinner.

Read more less